 |
POWER
METERS
The FOT-02
Power Meter represents the economical solution for fiber-optic
LAN installation and maintenance. This power meter tests both
singlemode and multimode fibers quickly and accurately. Turn
it on, select a wavelength, and start testing. The user-friendly
FOT-02 is ruggedly built to withstand outside plant work conditions.
- Low price
- Simple operation, direct dBm readings
- Calibrated at 850 nm, 1300 nm, and 1550 nm
- Compact, lightweight, and portable
- Battery included
| Model |
FOT-02 |
FOT-11A
|
FOT-12A
|
FOT-12AX
|
| Detector
type |
Ge
|
Si |
Ge
|
high
power Ge |
| Calibrated
wavelengths (nm) |
850,
1300,1550 |
650,780, 820, 850, 910 |
780, 850, 1300, 1310, 1550 |
780, 850, 1300, 1310, 1550 |
| Measurement
range (dBm) |
+6
to -50 |
+6
to -50 |
+6 to -60 |
+6 to -50 |
| Resolution
(dB) |
0.05
|
0.05
|
0.05 |
0.05 |
| Accuracy
(dB) |
±
0.25 (6%) |
±
0.20 (5%) |
±
0.20 (5%) |
±0.20
(5%) |
The
FOT-10A offers many of the advantages normally found in more
expensive units. It is microprocessor driven and features
linear amplification technology for long-term calibration.
Three models (see the table below) are available based on
the most popular wavelengths and power ranges.
- Five calibrated wavelengths
- Choice of dynamic ranges of up to
+23 dBm
- Simple, one-touch dBm measurements
- Auto-off function
- Battery, AC adapter/charger, rigid
carrying case, and shockproof holster included
| MODEL
|
FOT-11A
|
FOT-12A
|
FOT-12AX
|
|
Detector Type |
Si |
Ge |
high-power Ge |
|
Calibrated Wavelengths (nm) |
650, 780, 820, 850, 910 |
780, 850, 1300, 1310, 1550 |
780, 850, 1300, 1310, 1550 |
|
Measurement range (dBm) |
+6 to -60 |
+6 to -60 |
+23 to -50 |
|
Resolution (dB) |
0.05 |
0.05 |
0.05 |
|
Accuracy (dB) |
±0.20
(5%) |
±0.20
(5%) |
±0.20
(5%) |
The
FOT-20A offers an excellent price-quality ratio. Its applications
range from transmitter power measurements to fiber link
loss and component insertion loss testing. You receive a flexible
and reliable solution for practically any test environment.
- Direct loss measurement in dB
- Power measurement in dBm and W
- Five electronically calibrated wavelengths
- Battery, AC adapter/charger, rigid carrying case, and
shockproof holster included
| MODEL
|
-21A |
-22A |
-22AX |
|
Detector Type |
Si (5 mm) |
Ge (2 mm) |
high-power Ge (2 mm) |
|
Calibrated Wavelengths (nm) |
650, 780, 820, 850, 910 |
780, 850, 1300, 1310, 1550 |
780, 850, 1300, 1310, 1550 |
|
Measurement range (dBm) |
+6 to -60 |
+6 to -60 |
+23 to -50 |
|
Resolution (dB) |
0.05 |
0.05 |
0.05 |
|
Accuracy (dB) |
±0.20
(5%) |
±0.20
(5%) |
±0.20
(5%) |
In
a system that uses a laser transmitter, test experts need to
know the dynamic range of a laser source. With four models available
(see table below), the FLS-130A series includes the dual-wavelength,
single-port FLS-136A laser source, which reduces the number
of connection manipulations and accelerates testing operations.
Both the FOS-120A and FLS-130A share the following characteristics:
- Single- or dual-wavelength configuration
- 2 kHz signal generation for fiber identification
- Dual powering: 9 V battery and AC adapter/charger
- Auto-off function
- Rigid carrying case and shockproof holster with strap
| Model |
-121A |
-122A |
-123A |
-124A |
-125A |
-132A |
-133A |
-135A |
-136A |
|
Emitter type |
LED |
LED |
LED |
LED |
LED |
laser |
laser |
laser |
laser |
|
Wavelength (nm) |
850
±30 |
1300
±30 |
1550
±30 |
850
±30/1300
±30 |
1310
±30/1550
±30 |
1310
±20 |
1550
±20 |
1310
±20/1550
±20 |
1310
±20/1550
±20 |
Power output
(dBm)
9/125
um
50/125um
62.5/125um
|
-33
-17
-14
|
-36
-20
-16
|
-25
-25
-25
|
-33/-36
-17/-20
-14/-16
|
-20/-25
-20/-25
-20/-25
|
-7
-7
-7
|
-7
-7
-7
|
-7/-7
-7/-7
-7/-7
|
-8/-8
-8/-8
-8/-8
|
The
Pocket Pal, which helps you identify breaks, bends, faulty connectors
or splices, and other causes of signal loss for up to 5 km,
is an affordable troubleshooting tool that every fiber technician
should carry.
- Identifies faults with a bright red laser at 635 nm or
670 nm
- Operates for 80 hours (typical) in flashing mode
- Complies with Bellcore’s TR-NWT-001319 optical power requirements
-
Includes an ST, FC, or SC connectorized laser
-
Operates on two AA alkaline batteries
- Weighs
only 180 grams, including batteries
|
Model |
FLS-235B1 |
FLS-235B3 |
|
Emitter type |
laser |
laser |
|
Wavelength (nm) |
635 |
670 |
|
Typical power output (mW) |
0.80 |
0.80 |
|
Fiber identification range |
5 km / 3mi. |
5 km / 3 mi. |
This
basic OLTS is the recommended tool for low-volume testing. The
very economical FOT-30A is quite popular among LAN installers
and contractors. It features the WaveWise system that automatically
sets the power meter to the source wavelength to reduce errors
and increase efficiency.
- Readings
in dB, dBm, and W
- Single-
or dual-wavelength, one or two output ports
- Direct
loss measurement in dB
- Power
measurement in dBm and W
- Fiber-optic
adapter, battery, AC adapter/charger, rigid carrying case,
and shockproof holster included
|
Model |
-32A |
-32AX |
|
Detector type |
Ge (2 mm) |
high-power Ge (2 mm) |
|
Calibrated wavelengths (nm) |
780, 850, 1300, 1310, 1550 |
780, 850, 1300, 1310, 1550 |
|
Measurement range (dBm) |
+6 to -60 |
+23 to -50 |
|
Resolution (dB) |
0.05 |
0.05 |
|
Accuracy (dB) |
±0.20
(5%) |
±0.20
(5%) |
The
TK-LAN test kits include tools for installing, testing, and
troubleshooting LAN systems. All test kits come in a convenient
carrying case, with the necessary accessories such as test
jumpers, AC adapters/chargers, cleaning kits, and batteries.
- Power meter with germanium detector
calibrated at five wavelengths (FOT-20A series)
- LED source at 850 and 1300 nm (FOS-120A
series)
- Power meter with germanium detector
calibrated at five wavelengths (FOT-20A series)
- Laser source at 1310 and 1550 nm
(FLS-130A series)
- Power meter with germanium detector
calibrated at five wavelengths (FOT-20A series)
- LED source at 850 and 1300 nm (FOS-120A
series)
- Visual fault locator at 670 nm (FLS-235B
series)
- Power meter with germanium detector calibrated at five
wavelengths (FOT-20A series)
- LED source at 850 and 1300 nm (FOS-120A series)
- Laser source at 1310 and 1550 nm on two ports (FLS-130A
series)
- Power meter with germanium detector
calibrated at 20 wavelengths, data storage capacities, and
optional downloading capacities (FOT-90A series)
- Laser source at 1310 and 1550 nm
on two ports (FLS-130A series)
The
TK-CATV test kits include tools for installing, testing, and
troubleshooting CATV networks. All test kits come in a convenient
carrying case, with the necessary accessories such as test
jumpers, AC adapters/chargers, cleaning kits, and batteries.
- Power meter with germanium detector
calibrated at five wavelengths (FOT-20A series)
-
Laser source at 1310 and 1550 nm on two ports (FLS-130A
series)
- Visual
fault locator at 670 nm (FLS-235B series)
-
Live fiber detector (LFD-100 series)
- Power meter with germanium detector
calibrated at five wavelengths (FOT-20A series)
-
Laser source at 1310 and 1550 nm on two ports (FLS-130A
series)
- Visual
fault locator at 670 nm (FLS-235B series)
- Power meter with germanium detector
calibrated at 20 wavelengths, data storage capacities, and
optional downloading capacities (FOT-90A series)
- Laser source at 1310 and 1550 nm
(FLS-110 series)
- Visual fault locator at 670 nm (FLS-235B
series)
- Power meter with germanium detector
calibrated at 20 wavelengths, data storage capacities, and
optional
downloading capacities (FOT-90A series)
- Laser
source at 1310 and 1550 nm (FLS-110 series)
For
use in testing applications, Fico offers a series of pulse
suppressors. The pulse suppressor is packed in a rugged,
lightweight plastic box that is small enough to fit inside
the carrying compartments of most OTDRs. The pulse suppressor
is available with your choice of input and output connectors
installed on 3 meter pigtails. Standard lengths are
500 meters for singlemode and 100 meters for multimode.
Custom configurations are also available. For further
assistance please callor e-mail our Sales Department.
| PART
|
DESCRIPTION
|
PRICE
|
|
XXPUL0300MM |
Multimode 200 meters |
$583.00 |
|
XXPUL0500SM |
Singlemode 500 meters |
$633.00 |
Fico,
Inc. offers bare fiber adapters that are designed for quick
and secure fiber connection. They are particularly useful
for temporary connections to instruments during off-site operations
and fabrication processes. These adapters are suitable
for both singlemode and multimode fibers with 250um or 900um
buffered fiber. Compatible fiber types are 125um and
140um. Insertion loss is <1dB.
| PART
|
DESCRIPTION
|
PRICE
|
|
BFA |
ST |
$134.00 |
|
BFA |
SC |
$149.00 |
|
BFA |
FC |
$178.00 |
|
|
