Description:
The CoilWinder 1000 winder is a two speed, machine that can handle large, heavy coils and can provide very high winding torque. With (1) low speed for slower, very high torque needs and (1) higher speed for faster, high torque needs, this winder can be manufactured with various speeds and torques according to your application requirements.

Features:

1. Three standard models available:
   1000A: Winding headstock.
   1000B: Winding headstock with tailstock mounted on precision ways.
   1000C: Winding headstock, tailstock on precision ways and automatic wire guide traversing mechanism.
2. Two speed ranges with variable speed in each.
3. Heavy-duty welded steel construction.
4. Air actuated disc brake for positive stopping.
5. Electronic wire guide traverse: Two precision layering styles are provided; Parallel and Spiral (1000C).
6. Setup time is minimized by the use of electronic controls for precisely setting wire pitch and stopping at the desired turns count (1000C). The operator only needs to enter this data and set the winding width stops.
7. Reverse bend system eliminates the need for pounding wire or pressing coils into shape, produces tighter coils and uses less wire (1000C).
8. Easily adaptable for winding single or multiple coils.

Motor Equipment: 15HP (11.19 kW) - 75HP (55.95 kW) AC motor with foot controlled, variable speed vector drive.

Faceplate: 22" (558 mm) diameter.

Primary Reduction: Belt and pulley to gear reducer.

Secondary Reduction: Two speed gearbox; ratio between gear ranges is 7:1.

Spindle Speeds: Per application.

Maximum Torque: 17,000 ft.-lbs. (23,052 Nm)

Power Requirement: Electrical: Various horsepower's and three phase voltages available, depending upon application.
Air: 80 PSI (5.5 Bars) at minimal CFM.

Spindle Rotation: Either direction can be selected by a switch on the control panel.

Spindle Center Height: 49.5" (1257 mm) from the floor.

Brake: Air actuated disc brake on the spindle motor and air/oil hydraulic disc brake on the faceplate operated by removing foot from variable speed control, by total turns counter or by emergency stop button.

Tailstock: Mounted on precision ways to allow positioning anywhere along winding axis. 4" (102 mm) quill travel. Heavy duty frame and quill. 60° live center with #5 or #6 morse taper.

Maximum Distance Between Centers:
1000B and 1000C: 65" (1651 mm)

Maximum Swing Diameter:
1000A: 98" (2489 mm)
1000B & 1000C: 74" (1880 mm)

Machine Control:
A & B Models: Programmable Electronic Counter.
C Model: S-50 winding controller with 50 programmable stops, 7 program capacity, parallel and spiral layering and end stops to define winding width.
(See S-50 page for details)

Options:

1. CoilWinder MP-4 Controller automatically coordinates winding functions and provides for program storage.
   (See MP-4 page for details)
2. Multi-wire guide assembly.
3. Pulleys for square and rectangular wire.
4. Automatic Run.
5. Longer machine length.
6. Larger swing diameter.
7. Winding area safety devices.
8. Paper insulation dereeler/tensioners.
9. Multiple coil winding.
10. Custom modifications for special applications.