Corporate Office:
164 Still River Road
Bolton, MA 01740
Ph: (999) 999-9999
Fx: (999) 999-9999
MP-4 Machine Controller
S-50 Winding Controller
S-50 Winding Controller

The standard control package on all CoilWinder coil winding machines with automatic wire guide systems is the CoilWinder S-50.

This device provides for "at the machine" programming of wire guide pitch, automatic spindle slowing/stopping and layering style (parallel or spiral). The winding area is defined by operator positioned manual end stops.


  1. Pitch values range from 0.0000" to 3.0000"
    (0.00mm to 76.20mm)
  2. Wind modes are Parallel or Spiral.
  3. Turn Count ranges from 0.00 to 99999.99 and can display negative values.
  4. Operator can specify the turn count for a Slow and for a Stop.
  5. There can be as many as 50 Slow and Stop points per program.
  6. Seven sets of coil winding data (programs) may be stored.
  7. Left and Right end stop contacts define the winding area by causing the traverse to reverse direction.
  8. Traverse Left and Traverse Right Direction buttons and
  9. Traverse Direction arrows are provided.
  10. Traverse Home Left and Home Right buttons send the wire guide arm to the corresponding end stop.
  11. Traverse Jog Left and Jog Right buttons allow for incremental wire guide traverse motion but also include progressive acceleration for quicker setup of a wide traverse.
  12. Traverse Jog may be used during winding to make minor wire guide traverse position changes.
  13. The display has two lines of 40 characters each and a numeric keypad.
  14. The CoilWinder S-50 can continue running from the same place following a shut down or power loss. After powering back up, the control will display the same position within the coil that it displayed prior to the loss of power.

    For more information on coil winding equipment and other CoilWinder machines, please contact us at (999) 999-9999 or through our online contact form.

    Arrow Back Top

    The information contained in this website is for general information purposes only. Content may change without notice. CoilWinder is not responsible for any incorrect content listed or changes on the website.

Use of any website content, images or video is strictly prohibited.