Corporate Office:
164 Still River Road
Bolton, MA 01740
Ph: (999) 999-9999
Fx: (999) 999-9999
700 700 Heavy-Duty, High Torque
Coil Winder
700A Drawing
700A Drawing
700ZB Drawing
700B Drawing
700 Large Capacity, High Torque
Coil Winding Machine

The CoilWinder 700 winder is a single speed, high torque winder that can handle large, heavy coils. This heavy duty winder can be manufactured with various speeds and torques according to your application requirements.


  1. Three standard models available.
    700A: Winding headstock.
    700B: Winding headstock with tailstock mounted on precision ways.
    700C: Winding headstock, tailstock on precision ways and automatic wire traversing mechanism.
  2. Single speed range with variable speed.
  3. Heavy-duty welded steel construction.
  4. Air actuated disc brake for positive stopping.
  5. Electronic wire guide traverse: Two precision layering styles are provided; Parallel and Spiral (700C).
  6. Setup time is minimized by the use of electronic controls for precisely setting wire pitch and stopping at the desired turns count (700C). The operator only needs to enter this data and set the winding width stops.
  7. Reverse bend system eliminates the need for pounding wire or pressing coils into shape, produces tighter coils and uses less wire. (700C)
  8. Easily adaptable for winding single or multiple coils.

Motor Equipment: 5HP (3.73 kW) - 30HP (22.38 kW) AC motor with foot controlled, variable speed vector drive.

Faceplate: 22" (558 mm) diameter.

Primary Reduction: Belt and pulley.

Secondary Reduction: Gear reducer.

Spindle Speed: Per application.

Maximum Torque: 3,500 ft. - lbs. (4746 Nm)

Power Requirement: Electrical: 5HP: 220V, three phase, 40 amps.
10HP - 30HP: 460V, three phase.
Other voltages available.
Air: 80 PSI (5.5 bars) at minimal CFM.

Spindle Rotation: Either direction can be selected by a switch on the control panel.

Spindle Center Height: 43" (1092 mm) from the floor.

Brake: Electromagnetic spring set disc brake (for 5 HP) or air actuated disc brake operated by removing foot from variable speed control, by total turns counter or by emergency stop button.

Tailstock: Mounted on precision ways to allow positioning anywhere along winding axis. 4" (102 mm) quill travel. 60° live center in #5 or #6 morse taper.

Maximum Distance Between Centers:
700B and 700C: 65" (1651 mm)

Maximum Swing Diameter:
700A: 83" (2107 mm)
700B & 700C: 63 " (1599 mm)

Machine Control:
A & B Models: Programmable Electronic Counter
C Model: S-50 winding controller with 50 programmable stops, 7 program capacity, parallel and spiral layering and end stops to define winding width .
(See S-50 page for details)


  1. CoilWinder MP-4 Controller automatically coordinates winding functions and provides for program storage.
    (See MP-4 page for details)
  2. Multi-wire guide assembly.
  3. Pulleys for square and rectangular wire.
  4. Automatic Run.
  5. Longer machine length.
  6. Larger swing diameter.
  7. Hydraulic faceplate brake.
  8. Winding area safety devices.
  9. Paper insulation dereeler/tensioners.
  10. Multiple coil winding.
  11. Custom modifications for special applications.

For more information on coil winding equipment and other CoilWinder machines, please contact us at (999) 999-9999 or through our online contact form.

Arrow Back Top

The information contained in this website is for general information purposes only. Content may change without notice. CoilWinder is not responsible for any incorrect content listed or changes on the website.

Use of any website content, images or video is strictly prohibited.