Description:
The CoilWinder 100 coil winding machine provides for winding up to a 10" (254 mm) diameter coil. Four speed ranges allow for various winding speeds and torques.

Features:

1. Four speed ranges with variable speed within each range.
2. Maximum speed 5250 RPM.
3. Welded steel construction for superior strength.
4. Electrically actuated brake for positive stopping.
5. Electronic wire guide traverse: Two precision layering
   styles are provided; Parallel and Spiral.
6. Set-up time is minimized by use of electronic controls for setting wire pitch and stopping at the desired turns count.
7. The operator only needs to enter this data and set the winding width stops. Winding speed ranges are easily selected.
8. Easily adaptable for winding single or multiple coils.
9. Optional MP-4 control with greater programming power.

Motor Equipment: 1 HP (0.746 Kw) AC Vector motor and drive with foot controlled variable speed.

Faceplate: 8" (203 mm) diameter.

Reduction: Belt and pulley.

Power Requirement: Electrical: 208/220 V, three phase, 15 amps. Other voltages available.

Spindle Rotation: Either direction can be selected by a switch on the control panel.

Spindle Center Height: 38" (965 mm) from the floor.

Brake: Electrically actuated brake operated by removing foot from variable speed control, by programmed turns count or by emergency stop button.

Tailstock: Mounted on precision way to allow positioning anywhere along winding axis. 2.5" (63.5 mm) quill travel with quick toggle action. 60° spring loaded live center.

Maximum Distance Between Centers: 24” (609 mm)

Maximum Swing Diameter: 12" (304 mm)

Machine Control: S-50 winding controller with 50 programmable stops, 7 program capacity, parallel and spiral layering, pitch increment .0001" (.003 mm) and end stops to define winding width.
(See S-50 page for details)

Weight: 1000 lbs. (454 Kg)

Options:

1. CoilWinder MP-4 coil winding controller automatically coordinates coil winding functions and provides for program storage.
   (See MP-4 page for details)
2. Multi-wire guide assembly.
3. Automatic run.
4. Longer machine length.
5. Lower speed ranges.
6. Custom modifications for special applications.
7. Winding forms and toolings.
8. Winding area guard.