Corporate Office:
164 Still River Road
Bolton, MA 01740
Ph: (999) 999-9999
Fx: (999) 999-9999
500 Large Capacity, Heavy-Duty Coil Winder

500A Drawing
500A Drawing
500B Drawing
500B Drawing
500C Drawing
500C Drawing
500 Large Capacity,
Coil Winding Machine

The CoilWinder 500 is a three speed coil winding machine that is often used for winding larger diameter coils at lower speeds. In its headstock only configuration, the 500A is a very rugged and economical choice for hand winding.


  1. Three models available:
    500A: Winding headstock.
    500B: Winding headstock with tailstock mounted on precision ways.
    500C: Winding headstock, tailstock on precision ways, and automatic wire traversing mechanism.
  2. Three speed ranges with variable speed within each range. Maximum speed 85 rpm.
  3. Heavy-duty welded steel construction.
  4. Electrically actuated brake for positive stopping.
  5. Electronic wire guide traverse: Two precision layering styles are provided; Parallel and Spiral (500C).
  6. Setup time is minimized by the use of electronic controls for precisely setting wire pitch and stopping at the desired turns count (500C). The operator only needs to enter this data and set the winding width stops.
  7. Reverse bend system eliminates the need for pounding wire or pressing coils into shape, produces tighter coils and uses less wire (500C).
  8. Easily adaptable for winding single or multiple coils.

Motor Equipment: 2 HP (1.5 kW) AC vector motor and drive with foot controlled variable speed.

Faceplate: 14" (356 mm) diameter.

Primary Reduction: Belt and pulley.

Secondary Reduction: Gear reducer.

Spindle Speeds and Corresponding Torques
0-14 rpm 750 ft. - lbs. (1017 Nm)
0-50 rpm 210 ft. - lbs. (285 Nm)
0-85 rpm 121 ft. - lbs. (164 Nm)

Power Requirement: Electrical: 220 V, three phase, 20amps. Other voltages available.

Spindle Rotation: Either direction can be selected by a switch on the control panel.

Spindle Center Height: 43" (1092 mm) from the floor.

Brake: Electromagnetic spring set disc brake operated by removing foot from variable speed control, by total turns counter or by emergency stop button.

Tailstock: Mounted on precision ways to allow positioning anywhere along winding axis. 4" (102 mm) quill travel. 60° live center in No. 4 Morse Taper.

Maximum Distance Between Centers:
500B & 500C: 42" (1066 mm)

Maximum Swing Diameter:
600A: 83" (2107 mm)
600B & 600C: 63 " (1599 mm)

Machine Control:
A & B Models: Programmable Electronic Counter.
C Model: S-50 Winding Controller with 50 programmable stops, 7 program capacity, parallel and spiral layering and end stops to define winding width. (See S-50 page for details)

500A: 1500 lbs. (682 kg)
500B: 2500 lbs. (1136 kg)
500C: 3900 lbs. (1773 kg)


  1. CoilWinder MP-4 Controller automatically coordinates winding functions and provides for program storage.
    (See MP-4 page for details)
  2. Multi-wire guide assembly.
  3. Pulleys for square and rectangular wire.
  4. Automatic Run.
  5. Longer or shorter machine length.
  6. 3HP (2.24 kW) or 5HP (3.7 kWw) spindle motor.
  7. Heavy-duty tailstock.
  8. Winding area guard.
  9. Paper insulation dereelers/tensioners.
  10. Multiple coil winding.
  11. Custom modifications.
  12. Special applications.

For more information on coil winding equipment and other CoilWinder machines, please contact us at (999) 999-9999 or through our online contact form.

Arrow Back Top

The information contained in this website is for general information purposes only. Content may change without notice. CoilWinder is not responsible for any incorrect content listed or changes on the website.

Use of any website content, images or video is strictly prohibited.