(Heavy Duty)

  1. Represents maximum allowable misalignment of bearing centerline from a true perpendicular to the mounting surface.
  2. Tolerance to be small enough to allow normal press fits for mating parts.
  3. Unit incorporates ball bearings throughout.
  4. Unit to be shielded--seals optional.
  5. Lube fittings included with all units.
  6. Special sizes available on request.
  7. All units are cadmium plated with yellow chromate, per specification QQ-416, Type 2, Class 2.

Maximum Travel
(inches)
A
Model
No.
Load
Rating
lbs.**
B C D E F G H J K L M N S U*

1.50
1.5SBS-3-9 300 3.630 3.125 3.630 2.875 3.500 1.937 .563 .875 .531 .50 .25 .266 1/8 x 1/16 .562

2.00
2SBS-6-12 600 4.750 4.000 4.500 3.500 4.375 2.375 .653 1.344 .951 .72 .31 .266 3/16 x 1/16 .750

3.00
3SBS-9-16 900 6.250 5.312 6.250 4.750 6.190 2.750 .875 1.344 .890 .80 .38 .391 1/4 x 1/8 1.000

4.00
4SBS-12-18 1200 7.380 6.375 7.380 5.375 7.250 3.125 1.000 1.344 .890 1.03 .38 .391 1/4 x 3/32 1.125

5.00
5SBS-15-21 1500 8.625 7.500 8.625 6.125 8.500 3.375 1.187 1.531 1.091 1.19 .38 .391 5/16 x 1/8 1.312

6.00
6SBS-18-24 1800 10.125 8.750 10.125 7.125 10.000 3.875 1.313 1.750 1.340 1.34 .38 .531 3/8 x 1/8 1.500

7.00
7SBS-21-28 2100 11.500 10.000 11.500 8.000 11.375 4.125 1.375 1.750 1.380 1.63 .38 .531 3/8 x 1/8 1.750

8.00
8SBS-24-30 2400 13.250 11.250 13.250 9.250 13.125 4.500 1.625 1.813 1.340 1.56 .44 .531 1/2 x 3/16 1.875
ALL DIMENSIONS IN INCHES

* +.0005, -.0000
** Maximum working load ratings are valid for statically applied loads. For dynamic loading (Mechanical Oscillator, etc.) consult Yorkshire Engineering.

Applications | Drive Bearings | Roll Assemblies | Powered Rolls | Simplified Drive Systems
Mini Bearings
| Wrenches | Information Request Form | Ordering Information | Main SLIMB Page
About Yorkshire

Yorkshire Industries, Inc.
P.O. Box 5100
Andover, MA 01810
Toll Free: 1-888-475-1949
Fax 978-688-5348
solutions@yorkshireind.com