 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Flexible Thin Wall Tubing With A Flexible
Thin Adhesive Liner
Bonds To A Wide Variety Of Plastics, Rubbers And Metals
Good Mechanical Strength And Cut-Through Resistance
Provides A Permanent, Waterproof Environmental Seal
Meets UL And Military Specifications
USE INSUL-SEAL® HS-101-MW-2:1 FOR:
- Easy protection of cable and joint splices and electrical components from fluids, moisture and corrosion in outdoor, automotive and marine applications
- Flexible repairs of damaged wire insulation
- One-step electrical insulation and moisture sealing
SPECIFICATIONS:
- MIL-DTL-23053/4 Class 2
- UL 224 (Jacket)
ADHESIVE:
|
|
|
|
| Peel Strength, pli | Polyethylene |
|
| PVC |
|
|
| Lead |
|
|
| Aluminum |
|
INSUL-GRIP® HS-101-MW-2:1 INFORMATION:
- SHRINK RATIO: 2:1
- MINIMUM RECOMMENDED SHRINK TEMPERATURE: 121°C (250°F)
- OPERATING TEMPERATURE RANGE: -55°C TO 110°C
- LONGITUDINAL SHRINKAGE: +1/-5%
- PHYSICAL / ELECTRICAL /CHEMICAL
PROPERTIES:
Specific Gravity: 1.3
Tensile Strength: 2,100 psi
Ultimate Elongation: 450%
Secant Modulus, 2% : 17,000 psi
Heat Aging*: 168 hrs. @ 175° Elongation 175%
Heat Shock*: 4 hrs. @ 250°C No dripping or cracking
Cold Impact*: 4 hrs. @ -55°C No cracking
Volume Resistivity: 1014 ohm-cm
Dielectric Strength: 800 vpm
Corrosion Effect: Non-corrosive
Fungus Resistance: Non-nutrient
Water Absorption: 0.3%
* Outer Jacket Only
|
|
|
|
|
4-FOOT LENGTHS |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard Color: Black