 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Semi-Rigid Outer Wall, Adhesive-Lined, Polyolefin
Shrinkable Tubing
Excellent Strain Relief And Insulation Of Weak Points
A Few Sizes Can Accommodate A Wide Range Of Applications
Splash-Resistant, Moisture Resistant Covering
Not Intended For Use Where Immersion In Fluids Is Required
Meets Military Specifications
USE INSUL-SEAL® HS-101-MW FOR:
- Encapsulating electronic components, wire splices and delicate wire terminations to provide moisture resistance and mechanical protection
- Melting the encapsulant so it will flow to fill surface irregularities of the substrate
- Blocking the hot tubing to form a wire breakout
- Sealing the ends of electrical cables and rigid tubings
- Installations requiring re-work, retrofit or repair in the field
- Identifying circuits and components
- Rugged protection against abrasion, vibration and flexing
SPECIFICATIONS:
- UL E85381 rated for 600V
- AMS 3634
- MIL-DTL-23053/4 Class 1
INSUL-GRIP® HS-101-MW INFORMATION:
- SHRINK RATIO: 3:1
- MINIMUM RECOMMENDED SHRINK TEMPERATURE: 135°C (257°F)
- OPERATING TEMPERATURE RANGE: -55°C TO 110°C
- LONGITUDINAL SHRINKAGE: +1% max / -10% max
- PHYSICAL / ELECTRICAL / CHEMICAL
PROPERTIES:
Specific Gravity: 0.99
Tensile Strength: 1,500 psi
Ultimate Elongation: 200%
Low Temperature Brittleness: No failure
Heat Shock: 4 hrs. @ 250°C No dripping, flowing or cracking of the outer wall
Heat Resistance: 168 hrs. @ 175°C No dripping, flowing or cracking of the outer wall
Volume Resistivity: 1015 ohm-cm
Dielectric Strength: 500 vpm
Corrosion Effect: Non-corrosive
Fungus Resistance: Rating of 1 or less
Water Absorption: 0.1%
|
|
|
|
|
4-FOOT LENGTHS |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard Color: Black