DynaShear® - Sanitary Inline High Shear Mixer

Sanitary Inline High Shear Mixer - DynaShear™Designed as a high speed, high shear mixer and emulsifier for continuous processing, the DynaShear sets the standard for what in-line mechanical mixers should provide. It is constructed completely of 316SS (internals, housing, shafting and base), it's unique dual stage axial and radial heads provide greater throughput and flow, and the shear rates generated insure droplet and particle size reduction down to 3-5 microns with excellent distribution.


Some processors are using DynaShear for a single pass continuous mix after powder addition upstream, while others have found maximum results after recirculating back through a batch reactor for a 3 to 5 minute total blend time.


  • High Efficiency, High Shear Continuous Mixing

  • Unique Combination of Axial and Radial Stators

  • Low Maintenance-No Bushings, Shims or Wear Sleeves

  • Complies with the latest 3-A Third Party Verification (TPV) Standards #36-01

  • Fully Machined 316SS Housing

  • Stainless Steel Motor

  • Average Droplets of 3-5 Microns…with 98% Distribution Under 5 Microns

  • CIP-able and designed for rapid disassembly for cleaning or inspection


If your application requires higher intensity, more milling and greater particle size reduction, our versatile Boston Shearmill will generate droplet and particle size reduction down to 1 micron while withstanding uneven flow patterns, bumps, jolts and fluctuations in pressure.


Application Boston Shearmill DynaShear
Hard particle reduction down to 1 micron n/a
Emulsion droplet formation down to 1 micron 3-5 microns
Dispersion of hard agglomerates < 1 micron 3 microns


3-A Sanitary Standards