Standard Sepcifications

Foundation & Exterior | Exterior to Ceilings | Walls to Plumbing
HVAC to Laundry | Shelving to Warranty

Exhibit A
Building Specifications

FOUNDATION

Footing - 20" wide, 3000 psi poured concrete footing & lally column pads.
Walls - 10" wide, 3000 psi poured concrete walls.
Exterior walls will be coated with water-proofing material.
Sill sealer between top of walls and pressure treated sills.
Passive radon system
Location and size of drops walls will be determined by the Builder.

BASEMENT

Full unfinished basement with exposed concrete walls.
Floor - 3000 psi poured concrete approximately 3"- 4" thick.
Utilities - furnace, water heater, duct work, domestic and sanitary piping to be located in the basement as determined by the Builder.

GARAGE

Style - Two (2)-car garage located on grade.
Floor - 3000 psi poured concrete approximately 3"- 4" thick.
Garage overhead doors with automatic garage door opener
Finish - all walls and ceilings will be insulated, sheetrocked.
Concrete surfaces will be left natural and unpainted.

ROOF

Framing - (typical) 2"x10" roof rafters @ 16" o.c.
30 year Architectural Shingles - White aluminum drip edge above all soffits.
Step and roll flashing between clapboards and roof shingles.
Ice and water barrier extending three feet up from all soffits and in all valleys.
Continuous venting at all soffits and roof ridges.

EXTERIOR WALLS AND FINISH

Framing - (typical) 2"x6" wood studs @ 16"o.c.
Siding - vinyl siding on exterior walls - Buyer will choose color from Builder's samples.
Exterior Trim - corners, soffits, rakes, fascia, frieze board, and miscellaneous pieces will be covered by either white vinyl or white aluminum.
Gutters - seamless gutters and downspouts in white aluminum, location determined by Builder.

Foundation & Exterior | Exterior to Ceilings | Walls to Plumbing
HVAC to Laundry | Shelving to Warranty