Rotomixx® Mixer
Mixer Specifications
The Rotomixx series of stainless steel mixers are available in six (6) basic configurations as shown below:
| Model | 100RXDF | 100RXDC | 100RXDS | 100RXGF | 100RXGC | 100RXGS |
| Drive Type | Direct | Direct | Direct | 5:1 Gear reduction | 5:1 Gear reduction | 5:1 Gear reduction |
| Output Speed (RPM) | 1750 | 1750 | 1750 | 350 | 350 | 350 |
| Maximum Motor Frame | 145TC | 145TC | 145TC | 56C | 56C | 56C |
| Mounting Arrangement | Flange | C-Clamp | Sanitary Tri-Clamp Type Ferrule | Flange | C-Clamp | Sanitary Tri-Clamp Type Ferrule |
| Shaft Engagement (inches) | 5" | 5" | 5" | 4" | 4" | 4" |
| Shaft Diameter (inches) | 1" and 1.25" | 1" and 1.25" | 1" and 1.25" | 1" | 1" | 1" |
| Maximum Shaft Length (inches) | 48" | 48" | 58" | 72" | 72" | 72" |
| Approximate Weight (lbs.) | 70 to 110 | 80 to 125 | 75 to 115 | 82 to 130 | 100 to 145 | 90 to 135 |
Tri-Clamp® is a registered trademark of Tri-Clover, Inc.
Rotomixx Selection Table
(Volume Shown Below in Gallons)
Impeller Specifications
Direct drive Models (RXDF, RXDC, RXDS)
-
MaxiFoils™ - Standard high-speed impeller features three (3) wide-blade foils designed with a steep pitch for maximum flow within small tank diameters. Available with set screws, set bolts, or welded to shaft.
-
J-Style Propellers - For sanitary conditions, featuring threaded connection, three (3) high-efficiency blades contoured for superior flow. Similar power draw to MaxiFoils, but with 25% more pumping capacity and #4 polished surfaces.
Gear drive Models (RXGF, RXGC, RXGS)
-
Jetfoils™ - Standard low-speed impeller features three-blade foils designed for maximum efficiency (our lowest power-draw design). Available with set screws, set bolts, or welded to the shaft.