BenchMix™
Programmable High Shear Lab Mixers & Pilot Plant

 

Specifications

Model OPLB-300 RS-02 XP-02
Mixing Head Type Rotosolver Disperser, Rotostat Emulsifier or Low Speed Propellers in various sizes Rotosolver Disperser Rotostat Emulsifier
Output Speed 0 - 10,000 RPM 3600 RPM 3600 RPM
Horsepower 1/2 Hp Maximum Rating 1 Hp 1 Hp
Motor Characteristics Permanent Magnet DC Brushless Drive with Hall Sensor for regulation to 1% of set speed SS or Washdown, TEFC, 1Ph or 3Ph, 50/60 Hz SS or Washdown, TEFC, 1Ph or 3Ph, 50/60 Hz
Shaft Size 10mm x 356mm(3/8" x 14") 20mm x 635mm(3/4" x 25") 20mm x 635mm(3/4" x 25")
Stator Diameter Rotosolver 29mm (1.14")Rotostat 50mm (2") 60mm (2.36") 130mm (5.1")
Rotor Diameter Rotostat 24mm (1") N/A 63mm (2.5")
Props 1", 1½", 2" or 3" (Optional) N/A 76mm (3")
Capacity(Viscosity Dependent) 0.5 - 3 gal. (2 - 12 L) 0.5 - 3 gal. (2 - 12 L) 5-20 gallons 5-20 gallons
Weight (with stand) 55 lbs. 85 lbs. 85 lbs.
Mixer Stand Push button electric lift, 18" of travel in 27 seconds, mechanical brake and over running clutch - sealed lift tube 304 SS H-Style rigid base with adjustable spring loaded lift
Dimensions(with stand) Overall Height: 27.2" - 45.2" (691-1148mm) Overall Depth: 19.25" (489mm) Overall Width: 14.5" (368mm) Overall Height: 40" (1016mm) Overall Depth: 18" (457mm) Overall Width: 22" (559mm)
Controller Closed-Loop PLC / 115V / 60Hz system with digital, 2 line, 20 character alphanumeric display Optional: Nema 4 Digital AC Inverter with 1 Phase input for Variable Speed Control
Output Profiles Ten (10) user programmable profiles each with ten (10) time, speed, delay, prompt for user and end steps. Pre-programmed for use with eight (8) separate mix heads N/A

Rotosolver Model RS-02

Rotosolver Model RS-02

Rotostat Model XP-02

Rotostat Model XP-02

 

 

BenchMix

  1. General
  2. How It Works
  3. Specifications
  4. Options
  5. RFQ