Admixer™ - For Sanitary Static Mixing & Blending
Specifications
Models and Specifications
| Sanitary "SAN" Series Model | Nominal Diameter (inches) | I.D.(inches) | Length(inches) | Approx. Weight (lbs) |
| SAN1-6R-S | 1 | 0.87 | 8-3/4 | 1 |
| SAN1.5-6R-S | 1-1/2 | 1.37 | 13 | 2 |
| SAN2-6R-S | 2 | 1.87 | 17-1/4 | 5 |
| SAN2.5-6R-S | 2-1/2 | 2.37 | 21-3/4 | 8 |
| SAN3-6R-S | 3 | 2.87 | 26 | 12 |
| SAN4-6R-S | 4 | 3.83 | 34-1/2 | 20 |
For more information on understanding and applying Admixer technology, the following Technical Reports are available at your request by calling Admix at 800.466.2369 or 
click on the links below for PDF version:
Tech Notes:
#101 - Admixer Theory of Operation
#102 - Sizing the Admixer
#105 - Gas Blending
Processing Reports:
#201 - Food, Beverage & Dairy Processing
ADMIXER Characteristics
| Admixer | |
| Mixing Action | Plug Flow |
| Viscosity Range | 1 to 1,000,000 cps |
| Viscosity Ratio | 10,000:1 |
| Volumetric Ratio | 10,000:1 |
| Density Ratio | 100:1 |
| Shear Rate | Low, but uniform (up to 10³ sec²) |
| Velocity Dependency | Laminar Flow - None Turbulent - 1 ft/sec minimum |
| Dispersion Capability | Good to Very Good |
| Pressure Drop | Low (1 to 5 ft) |
| Maintenance | Low |
| Injection Requirements | Very Important Especially at High Viscosity or Volumetric Ratios |
| Energy Cost | Low (25% of Dynamic Mixers) |
| Capital Cost | Low |