panel, paneling, wainscoting, panel wall, wall paneling, wood paneling
supplies affordable wainscot, cornice, Molding, trim, accents to US and Canada
"Custom Wainscot Results... Without Custom Pricing!"

home >   how is it made > what is MDF?     

+ ProductsWainscot & Beadboard Wall Paneled Flat Paneled Raised Paneled Bead Board
Columns Square Columns Round Columns Pilasters Double Columns Column Capitals
Cornices Symmetrical Modern Profile Georgian Profile Dentil Profile Multi Step Coffered Ceilings Curved Walls Corners
Accents and Trim Baseboards Chair Rails Casings Door Headers Door Facing
Ornaments Ceiling Medallions < 30" Ceiling Medallions > 30" Art Niches Brackets

Pricing
Shipping
Warranty
Contact

FAQ's
Installation
Photo Gallery

About
Privacy
Site Map
Contact

Contractors Welcome!

Beadboard payment optionWainscoting payment optionPaneling payment option


Testimonials

"I can't believe how much our house has changed! The comments we get from guests and friends are unending; you sure came through with your system!"

MDF

What is MDF?
MDF is Medium Density Fiberboard, which is composed of sawdust, and a specially formulated resin (glue) mixed together. This product is then compressed in several stages, thus giving a finished product. MDF has become very popular in the trim carpentry, furniture, and kitchen industries. More Details ...

What is a primed finish?
Primed finish or priming refers to the preparation stage of the moldings. All MDF products are required to be primed/painted with an industry standard sealer that is referred to as primer. This sealer/primer penetrates and seals the MDF so that the finish coat of paint is applied with ease. Deco moldings guarantees that every piece of molding is primed and ready for a finish coat of paint, an enormous time saver over solid wood trims.

 

What is polyurethane?
Polyurethane is a foam type product, however it has more structural integrity than the Styrofoam moldings. Polyurethane is injected into moulds that are then encased, thus allowing the expansion of the foam to occur within the mould. This allows a stronger bonding of the foam. Polyurethane manufacturers can be very creative in regards to their product offering and designs. This product may not be used in construction depending on the building codes and bylaws in certain regions of the country.

Are polyurethane trims easy to install?
Most polyurethane trims are in fact installed by the homeowner. Although they may appear to be easy to install, perception may be misleading. Some manufacturers offer corner and joiner blocks, which are highly recommended. Without the joining blocks, the do it yourselfer must meticulously sand the joints (a mask is recommended due to the fine dust resulting). The joiner blocks also hide any shrinkage of material. Even the slightest 1/16 th opening in the trim would result in an unsightly hairline. Depending on the manufacturer, the type of adhesive, and paint used, polyurethane does have a tendency to shrink.

Do products have to be primed before painting?
Yes, all MDF, plaster and wood products as suggested above, should be primed. This is a task that is already completed when you purchase DecoTrim. More info

Can MDF wood trims be used outdoors?
Deco moldings products are developed for interior use only.

Do you offer pre-made or pre-formed cornice?
Yes.

Does your DecoTrim shrink?
All MDF moldings that are supplied shrink on a minimal basis. For every 16 feet of molding installed (1 piece) a shrinkage factor of 1/16" occurs.

How does one alleviate the problem of shrinkage?
The problem of shrinkage is alleviated in the installation process. At Deco moldings, we use a specifically formulated MDF glue that when used, it forms a high bonding adhesion that virtually eliminates shrinkage. Along with this glue, an installation process of pinning with brad nails every 16" on 45-degree angles also enhances the probability of a proper installation.

Can I glue your trim?
For the best installation of our cornice moldings, we would highly recommend that the choice of installation method be the use of brad nails. These brad nails would require the use of a bradder gun and an air compressor. (Please go to our page called Installation tips for further details).

All of our other product lines available such as chair rails, baseboards, and casings can be glued with a special construction adhesive such as PL200 by Bulldog Grip. We would like to recommend the same installation process as the installation of cornice moldings, for optimum adhesion, be used for these products.

Will Deco Trim retain its original length following installation?
DecoTrim will maintain its original length only with the proper installation process and the specific MDF glue.

How do I cut cornice molding miters?
For cornices like the SM5 & SM7, cut at a 45 degree angle Please refer here , at a 52 degree angel, like the DL6 or GE7, Please refer here

I insist on using an electric miter saw. How do I cut cornice moldings with it?
You must first read, understand, and follow the safety precautions provided to you by the manufacturer of your saw. Any professional carpenter we've met recommends that you do not cut cornice moldings on the flat. We recommend that you visit our page called installation tips for more details.

Can I have a free in home estimate?
Yes, of course, you only have to ask.

Our house has bull nosed corners, how do would you install moldings for us We have two examples of how that can be done, It depends entirely on your preference.

Can the average homeowner install trim?
We recommend that the average homeowner will need to have the cornice moldings installed. If the average homeowner has a certain level of experience in the installation of cornice moldings as well as the proper tools, then they may attempt to try the installation themselves. Deco moldings can install your moldings by our professional team of installers. More installation tips

How long does the installation take?
Under normal circumstances, just one day. We typically need 1-2 week lead-time.

Do you install plaster, polyurethane (foam), or other manufacturers trim?
No.

Do you offer any warranty?
Yes. Our product has a warranty for a period of five years, and our installation is guaranteed for one year.

Can you design a custom trim for us?
Yes if the quantity is sufficient, just contact our staff for details.

What is the average installed cost of your trim?
From $4.95 to $7.95 per running foot for profiles up to 7" inches (180 cm). At $4.95 per foot, a 10 x 12 average dinning room would cost 44' x $4.95 = $218 plus GST. We also sell our trim over the counter at $3.50 per foot less.

More Questions?
Just ask, by phone or email

 

back to top

Wainscot / Beadboard ~ Columns ~ Cornices ~ Accents / Trim ~ Ornaments ~ Gallery ~ Installation
Pricing ~ FAQ ~ Gallery ~ Site Map

panel, paneling, columns, wainscoting, panel wall, wall paneling, wood paneling, beadboard, wainscot, ceiling panel, panel window, panel wood, material paneling, beadboard paneling, painting paneling, wainscotting, panel wainscoting, panel wall wood, interior wall paneling, home panel, panel wainscot, wainscot panel, decorative panel wall, bead board, beadboard wainscoting, interior wood paneling, decorative wall paneling, wall panelling, beadboard ceiling, wood wall paneling, panelling, wainscot design

1300 E. Desert Inn Road, Suite 210
Las Vegas, Nevada  89109
Toll Free :1 888 877 7777