On
the front panel of the Top Hat, we’ve made communications
and control easy. Each function above has its own clearly
labeled section. You can reprogram or change your VHF
and microwave channels, connect your dial up telephone
line, and connect to your PTZ and camera controls via
rugged Phoenix locking connectors. DC external output
is available via a 2.5mm coaxial jack, enabling you
to easily power your installation monitor or other peripheral
device. On the side of the Top Hat, you’ll find
rugged connections for your VHF and Microwave Antennas.
Here are just a few examples of how to use Top Hat:
In a Utility Box or Pole Cam
With an inverted dome camera, set it up inside
a car or as a drop camera outdoors
Set it up with a downward looking PTZ and camera
system in a building’s window
Features
Single box contains VHF RX, Microwave TX, and Camera
Control Functions
Easily transported and replaced in many concealments
Eliminates unreliable wiring and connections
Standardizes on single means of connecting to multiple
PTZ units and cameras
DTC VMS/L-2000 video transmitter standard
250mW / 2 Watt switch selectable
Ten user programmable channels, including video
and two audio sub-carriers
DTC R-2002 VHF receiver standard
Supports wireless DTMF tone decoding
Ten control channels in either 138-150 MHz or 150-174
MHz bands
User programmable from front panel
Phoneline interface with auto answer
Serial interface to Sony CVX series cameras
Discrete line interface to all other PTZ controls
and cameras
Universal power supply, 12 VDC, 3.5 Amps from 90-240
VAC 50/60 Hz
DC power output for powering accessories, ie installation
monitor
Remotely controllable/programmable video transmitter
BNC Video input and output
Models
VTH-VML-2000, 1700-1850 MHz operation
VTH-VMS2-2000, 2200-2300 MHz operation
VTH-VMS-2000, 2400-2500 MHz operation
VTH-VML-5000, 1700-1850 MHz operation
VTH-VMS2-5000, 2200-2300 MHz operation
V TH-VMS-5000, 2400-2500 MHz operation
Note: Specify 150-174 MHz or 138-150 MHz VHF control
range
On
the front panel of the Top Hat, we’ve made communications
and control easy. Each function above has its own clearly
labeled section. You can reprogram or change your VHF
and microwave channels, connect your dial up telephone
line, and connect to your PTZ and camera controls via
rugged Phoenix locking connectors. DC external output
is available via a 2.5mm coaxial jack, enabling you
to easily power your installation monitor or other peripheral
device. On the side of the Top Hat, you’ll find
rugged connections for your VHF and Microwave Antennas.
BACK TO TOP
ABOUT DTC