Novasuede
passes the following flammability tests without
additional FR treatment. |
Cal
11E |
Pass: |
UFAC/NFPA260 |
Class
1: |
ASTM
E84 |
(Glue
down method) Class A: Novasuede, Novasuede/sheeting |
To meet other flammability specifications, it
may be necessary to apply a flame retardant
(FR) treatment to the Novasuede or Nytek. Majilite
can treated to the following standards. The
specific FR treatment may vary according to
the standard requested. Please be specific as
to which standard is required for individual
orders.
|
BS
282, Part 1 (Nord Arch) |
Novasuede,
Novasuede on 1/8" foam tricot |
I.M.O.
652 (16),
Sections 8.2 and 8.3 |
Novasuede,
Novasuede/knit, Novasuede/sheeting |
I.M.O.
653 |
Novasuede
(minimums apply) |
B.S.
5852, Part 1,
Ignition
sources #0 and #1
|
Novasuede,
Novasuede/knit, Novasuede/sheeting |
B.S.
5852, Part 2,
Ignition source #5 (crib 5) |
Novasuede,
Novasuede/knit, Novasuede/sheeting |
BS
46, Part |
Novasuede/sheeting |
Lloyd’s
Certificate |
"Material
Having Low Flame Spread Characteristics"
(based on BS 46, part ): Novasuede, Novasuede/sheeting |
Lloyd’s
Certificate |
"Material
Having Low Flame Spread Characteristics and
Not Capable of Producing Excessive Quantities
of Smoke and Toxic Products of Combustion"
(based on IMO Test Procedures Code, Annex 1,
Part 5 and Part 2) |
FAR
25.853 (a)
Appendix F Part I (a)(1)(ii) |
(12
second vertical burn) |
MVSS302 |
|
Majilite
has tested representative lots of flame retardant-treated
Novasuede and Nytek by the methods listed
above at independent laboratories. The test
reports are on file and available upon request.
New orders are manufactured by the same methods
as the tested materials and are quality control
tested by Majilite. Unless otherwise requested
in writing from the customer and likewise
acknowledged by Majilite, the above listed
tests are not performed and certified on individual
orders. |