New
Metallics pass the following flammability tests without
additional FR treatment. |
Cal
117E |
Pass: |
UFAC/NFPA260 |
Class
1: |
ASTM
E84 |
(Glue
down method) Class A: New Metallics, New Metallics/Sheeting |
To meet other flammability specifications, it
may be necessary to apply a flame retardant
(FR) treatment to the New Metallics or Nytek. Majilite
can treated to the following standards. The
specific FR treatment may vary according to
the standard requested. Please be specific as
to which standard is required for individual
orders.
|
BS
282, Part 1 (Nord Arch) |
New
Metallics, New Metallics on 1/8" foam tricot |
I.M.O.
652 (16),
Sections 8.2 and 8.3 |
New
Metallics, New Metallics/knit, New Metallics/sheeting |
I.M.O.
653 |
New
Metallics |
B.S.
5852, Part 1,
Ignition
sources #0 and #1
|
New
Metallics, New Metallics/knit, New Metallics/sheeting |
B.S.
5852, Part 2,
Ignition source #5 (crib 5) |
New
Metallics, New Metallics/knit, New Metallics/sheeting |
BS
476, Part 7 |
New
Metallics/sheeting |
Lloyd’s
Certificate |
"Material
Having Low Flame Spread Characteristics"
(based on BS 46, part ): New Metallics, New
Metallics/sheeting |
Lloyd’s
Certificate |
"Material
Having Low Flame Spread Characteristics and
Not Capable of Producing Excessive Quantities
of Smoke and Toxic Products of Combustion"
(based on IMO Test Procedures Code, Annex 1,
Part 5 and Part 2): New Metallics |
FAR
25.853 (a)
Appendix F Part I (a)(1)(ii) |
(12
second vertical burn): |
MVSS302 |
|
Majilite
has tested representative lots of flame retardant-treated
New Metallics and Nytek by the methods listed
above at independent laboratories. The test
reports are on file and available upon request.
New orders are manufactured by the same methods
as the tested materials and are quality control
tested by Majilite. Unless otherwise requested
in writing from the customer and likewise
acknowledged by Majilite, the above listed
tests are not performed and certified on individual
orders. |