majilite
majilite
majilite
majilite
majilite

majilite

 


majilite
majilite
majilite
majilite
majilite
majilite
majilite
majilite
majilite
majilite
majilite
majilite
majilite
majilite
 

Grandeur, Panache and Vista pass the following flammability tests without additional FR treatment.
Cal 117E Pass:
UFAC/NFPA260 Class 1:
ASTM E84 (Glue down method) Class A: Grandeur, Panache and Vista; Grandeur, Panache and Vista/sheeting

To meet other flammability specifications, it may be necessary to apply a flame retardant (FR) treatment to the Novasuede or Nytek. Majilite can treated to the following standards. The specific FR treatment may vary according to the standard requested. Please be specific as to which standard is required for individual orders.

BS 282, Part 1 (Nord Arch) Grandeur, Panache and Vista: Grandeur, Panache and Vista on 1/8" foam tricot
I.M.O. 652 (16),
Sections 8.2 and 8.3
Grandeur, Panache and Vista; Grandeur, Panache and Vista on 1/8" foam tricot; Grandeur, Panache and Vista/knit; Grandeur, Panache and Vista/sheeting
I.M.O. 653 Grandeur, Panache and Vista
B.S. 5852, Part 1,
Ignition sources #0 and #1
Grandeur, Panache and Vista; Grandeur, Panache and Vista/knit; Grandeur, Panache and Vista/sheeting
B.S. 5852, Part 2,
Ignition source #5 (crib 5)
Grandeur, Panache and Vista; Grandeur, Panache and Vista/knit; Grandeur, Panache and Vista/sheeting
BS 46, Part Grandeur, Panache and Vista/sheeting
Lloyd’s Certificate "Material Having Low Flame Spread Characteristics" (based on BS 46, part ): Grandeur, Panache and Vista; Grandeur, Panache and Vista/sheeting
Lloyd’s Certificate "Material Having Low Flame Spread Characteristics and Not Capable of Producing Excessive Quantities of Smoke and Toxic Products of Combustion" (based on IMO Test Procedures Code, Annex 1, Part 5 and Part 2)
FAR 25.853 (a)
Appendix F Part I (a)(1)(ii)
(12 second vertical burn)
MVSS302

Majilite has tested representative lots of flame retardant-treated Novasuede and Nytek by the methods listed above at independent laboratories. The test reports are on file and available upon request. New orders are manufactured by the same methods as the tested materials and are quality control tested by Majilite. Unless otherwise requested in writing from the customer and likewise acknowledged by Majilite, the above listed tests are not performed and certified on individual orders.