sliding patio door

Sliding Patio Door Care & Maintenance

Operating Door Panel Adjustment
If your door panel does not operate smoothly it can be adjusted via the two adjustment screws on the bottom inside face of the operating panel.

To adjust the door, remove the plugs covering the adjustment screws. Using a phillips screw driver, adjust the operating panel up or down being sure to keep the panel square with the lock side jamb. Turning the adjustment screws clockwise will lower the door panel, counter clockwise will raise the panel.

Lock and Keeper Adjustment
To make sure your patio door closes correctly, the keeper can be adjusted up or down until the latch engages properly. You can also tighten or loosen the lock mechanism on the door by using the adjustment screw in the lock.

Screen Adjustment
Swing and Sliding Patio Doors are both equipped with identical rolling screen as standard. If your rolling patio door screen does not operate smoothly it can be adjusted via the four adjustment screws on the inside face of the screen, located at the bottom.

To adjust the screen, remove the small caps covering the adjustment screws. Using a medium size straight-blade screw driver adjust the rollers, up or down, making sure to keep the screen square with the lock side jamb.

Painting & Staining • Condensation Solutions
• Casement Windows • Glider Windows
• Awning Windows • Sliding Patio Doors
• Double Hung Windows • Swing Patio Doors