kitchen remodelling idea
THE KITCHENWORKS REFACING PROCESS.
We want to make your home improvement process as stress free
as possible. Below are the steps we take to ensure that you
receive the quality, service, and value you deserve:
1. BLUEPRINTS are prepared in your home by a qualified
draftsman. This enables us to manufacture custom made doors
and drawer fronts to the precise measurements of your kitchen.
2. MANUFACTURING is the next step. At our local factory
we use state-of-the-art equipment to insure the highest quality
standards in the industry.
3. Now your kitchen is ready for SCHEDULING.
4. REMOVAL of existing doors and drawer fronts is the
first stage of the actual installation process. These doors
are discarded--we do not re-use them.
5. We STRENGTHEN AND REPAIR cabinet frames where needed.
We then carefully sand and prepare the exposed frames to insure
that the proper bonding will take place.
6. We BUILD OUT the underside of all upper cabinets--for
three reasons... It allows us to seal the cabinet frames from
any moisture in the kitchen, it prevents the lower rail of
the cabinet from chipping and splitting, and--it is much easier
to keep clean!
7. Next we DOUBLE BOND all sides, undersides, toe kicks
and face frames with a Furniture Grade Veneer. Our exclusive
"Double Bonding Process" involves the use of a cold PVC adhesive
which is applied to both the panel and the cabinet frame.
The way in which we double bond the cabinet sets us ahead
of industry standards. Hand filing is done after all surfaces
have been covered. This is what gives you that "Furniture
Finish." For oak, birch, maple and cherry wood installations,
we laminate all sides, undersides, toe kicks and and face
frames with a matching top quality wood veneer.
8. New custom doors with concealed hinges and new drawer
fronts are now INSTALLED throughout the kitchen. Doors and
drawer fronts are oak, birch, maple, cherry wood, or a High
Density Fiberboard covered with matching grade veneer. On
wood installations, all materials are sanded, stained, sealed
and lacquered. This process ensures a beautiful, durable furniture
finish.
9. FINISHING DETAILS such as matching mouldings, designer
handles and bumper pads are now installed.
Click
here to find out more!
|
remodelling kitchen
kitchen remodelling idea
kitchen remodelling plan
kitchen and bath
remodelling
Kitchen Remodelling Home
|