kitchen remodelling idea

THE KITCHENWORKS REFACING PROCESS.

We want to make your home improvement process as stress free as possible. Below are the steps we take to ensure that you receive the quality, service, and value you deserve:

1. BLUEPRINTS are prepared in your home by a qualified draftsman. This enables us to manufacture custom made doors and drawer fronts to the precise measurements of your kitchen.

2. MANUFACTURING is the next step. At our local factory we use state-of-the-art equipment to insure the highest quality standards in the industry.

3. Now your kitchen is ready for SCHEDULING.

4. REMOVAL of existing doors and drawer fronts is the first stage of the actual installation process. These doors are discarded--we do not re-use them.

5. We STRENGTHEN AND REPAIR cabinet frames where needed. We then carefully sand and prepare the exposed frames to insure that the proper bonding will take place.

6. We BUILD OUT the underside of all upper cabinets--for three reasons... It allows us to seal the cabinet frames from any moisture in the kitchen, it prevents the lower rail of the cabinet from chipping and splitting, and--it is much easier to keep clean!

7. Next we DOUBLE BOND all sides, undersides, toe kicks and face frames with a Furniture Grade Veneer. Our exclusive "Double Bonding Process" involves the use of a cold PVC adhesive which is applied to both the panel and the cabinet frame. The way in which we double bond the cabinet sets us ahead of industry standards. Hand filing is done after all surfaces have been covered. This is what gives you that "Furniture Finish." For oak, birch, maple and cherry wood installations, we laminate all sides, undersides, toe kicks and and face frames with a matching top quality wood veneer.

8. New custom doors with concealed hinges and new drawer fronts are now INSTALLED throughout the kitchen. Doors and drawer fronts are oak, birch, maple, cherry wood, or a High Density Fiberboard covered with matching grade veneer. On wood installations, all materials are sanded, stained, sealed and lacquered. This process ensures a beautiful, durable furniture finish.

9. FINISHING DETAILS such as matching mouldings, designer handles and bumper pads are now installed.

Click here to find out more!