Installation
Guide (PDF, 1.1Mb)
Specifications
and Technical Data (PDF, 1.2Mb)
How to Estimate Your Fence:
1. Draw a layout of your fence area.
REMINDER:
All fence sections come in 8’ lengths
All gates come in 4’ lengths
2. Measure the entire area to see how many fence sections you will need
REMINDER
You can always cut your fence sections down if you are off by any measurement.
3. There are four different kind of posts
THE LINE POST: has holes going right through the entire post for use
when sections are being linked together in a straight line.
THE CORNER POST: are used when there is a ninety degree angle where two
sections are being linked together at a corner.
THE END POST: are used for in between gates or when your fence line ends.
THE BLANK POST:
4. Draw a layout of your fence area with the number of fence sections
that will be needed with the number and type of posts.
5. Gates should be installed when you are completely enclosing an area.
To figure gate measurements first assemble the gate and then leave 2” of
gate hardware to get your inside to inside dimensions. (For example if
your gate is 44” you would need an opening of 46” inside
to inside. Therefore you would set your posts so that there is 46” of
space between the two posts.)
Click to enlarge
Also available:
Installation
Guide (PDF, 1.1Mb)
Specifications
and Technical Data (PDF, 1.2Mb)
If you need help please email your
diagram to sales@aVinylFence4You.com. |