Labsphere
About Labsphere
Products
What's New
Technical Information
Site Index
Contact Us
Back Home

Technical Information
 

Calibrated Spectral Flux Standards are available in sets of three screened and seasoned lamps. The lamps are calibrated for spectral flux, for use with Labsphere SLMS Spectral Lamp Measurement Systems. The use of three lamps prolongs the useful life of each lamp, since they may be used interchangeably. The multiple lamp set allows the user to check the lamps against each other to verify calibration data over time. A calibration certificate verifying traceability to national laboratory standards is provided for each lamp in the set. Calibrated Spectral Flux Standards are also sold individually.

The lamp housing consists of a socket with mounting hardware to center the lamp filament at the sphere center with a 0.56 inch diameter mounting rod with a 1/4-20 thread. Cabling is provided for power connection to the Labsphere LPS Lamp Power Supplies.

CLFS-600 andCLFS-1400
CALIBRATED LUMINOUS FLUX STANDARDS

Following the recommendations of national laboratories for photometric calibration, Calibrated Luminous Flux Standards are sold in sets of three screened and seasoned lamps. The use of three lamps prolongs the useful life of each lamp as they may be used interchangeably. The multiple lamp set allows the user to check the lamps against each other to verify calibration data over time, and to determine if any damage has occurred during handling and shipping. Lamp measurement system accuracy is ensured by routine reference to the calibrated lamp standard. The lamps are calibrated for total luminous flux (lumens). A calibration certificate verifying traceability to national laboratory standards is provided for each lamp in the set. Calibrated Luminous Flux Standards are also sold individually.

The lamp housing consists of a socket with mounting hardware to center the lamp filament at the sphere center with a 0.56 inch diameter mounting rod with a 1/4-20 thread. Cabling is provided for power connection to the Labsphere LPS Lamp Power Supplies.

SPECIFICATIONS AND ORDERING INFORMATION

LAMP STANDARD SETS

PART NUMBER

CLFS-600

CLFS-1400

CSFS-600

CSFS-1400

Calibration:

Luminous Flux

Luminous Flux

Spectral
Flux

Spectral
Flux

Number of Lamps:

3

3

3

3

Approximate Lumens:

450

1400

450

1400

Rated Power:

35 W

75 W

35 W

75 W

Rated Voltage:

12.8 W

28 W

12.8 W

28 W

Lamp Envelope:

Clear

Clear

Clear

Clear

Lamp Base:

SC bayonet

Min screw

SC bayonet

Min screw

 

INDIVIDUAL LAMP STANDARDS

PART NUMBER

CL-600

CL-1400

SCL-600

SCL-1400

Calibration:

Luminous Flux

Luminous Flux

Spectral
Flux

Spectral
Flux

Number of Lamps:

1

1

1

1

Approximate Lumens:

450

1400

450

1400

Rated Power:

35 W

75 W

35 W

75 W

Rated Voltage:

12.8 W

28 W

12.8 W

28 W

Lamp Envelope:

Clear

Clear

Clear

Clear

Lamp Base:

SC bayonet

Min screw

SC bayonet

Min screw


 

about labsphere | products | what's new | technical library | site index | contact us | back home

LS, Inc.
North Sutton, NH 03260
Voice 999-999-9999 | Fax 999-999-9999 | Internet Mail:

© 2000-2024 LS All rights reserved