ATTENUATOR |
|
Bulkhead (female To female)
Attenuator |
|
Bulkhead Attenuator utilize a wavelength sensitive
neutral density filters. Specify for 1310nm and 1550nm operation.
Available in SC, ST, FC for 5dB, 10dB, 15dB, 20dB, 25dB, 30dB values.
Other values available on request. |
|
Variable Attenuator (Clip-On Type) |
|
Variable attenuator (Clip-On type) is a completely passive device
which works by physical attenuation of a 3mm jacketed Singlemode
cable. It can be attached at any point in a cable providing
attenuation levels from 0 to >47dB at 1550nm, 0 to >21dB at 1310nm
and low back reflection. Good for several uses. |
|
In-line Fixed Attenuator |
|
The In-Line Fixed Attenuator is built to meet your low reflection
attenuation requirements. Each cord is custom built upto 10 meters
in length to accommodate your fiber length and connector type. The
5dB and 10dB version hold a +/- 0.5dB tolerance with the 15dB and
20dB holding a 1 dB tolerance. Please specify operating wavelength. |
|
Variable Attenuator (Air-Gap Type) |
|
Air-Gap variable attenuator has an
alignment sleeve that provides a low insertion loss of 0.15dB and can be
used on both multimode and singlemode pplications. Attenuation range is
0dB to 20dB and is available in FC/PC type. |
|
Plug Type (male To female) Attenuator |
|
Plug type attenuator contains doped fiber suitable for dual
wavelength operation. Available in FC, SC, ST, LC & MU for 5dB,
10dB, 15dB, 20dB values. Other values available on request. |
|
|
|
|
Connector
SC, FC
ST , Biconic
LC, MU |
Polish
UP APC
AP APC |
Fiber Type
SM Singlemode
MM Multimode |
Attenuation
Level
03 - 3dB, 05 - 5dB
07 - 7dB, 10 -10dB
15 - 15dB, 20 - 20dB |
Price List
GSR-FC-UP-SM-XX |
1-20dB FC/PC
Plug Type Attenuator |
GSR-SC-UP-SM-XX |
1-20dB SC/PC
Plug Type Attenuator |
GSR-LC-UP-SM-XX |
1-20dB LC/PC
Plug Type Attenuator |
|
back to
product page |