Automate Fluid Handling
 

 

 

Modular accessories can be added to the Automation Stations and the Prep Stations to meet the specific needs of your application. These accessories are designed to communicate through RS-485 serial ports and are controlled and recognized through the Automation Stations and the Prep Stations so that initialization is completely automated. The power requirement for these accessories is 85 to 240V auto selecting at a line frequency of 50 to 60 Hz. Accessories for the Automation Stations and the Prep Stations are listed with brief descriptions below.

 

A total of sixteen Model 208 eight channel syringe pumps plus sixteen Model 201 single channel syringe pumps plus fifteen Model 200 PR peristaltic pumps plus fifteen Model 203/206 RS rinse station pumps can be simultaneously connected to and independently addressed by an Automation Station or a Prep Station. This is a total of sixty-two pumps!

 

 

 



Syringe Pumps We offer the Model 208 eight channel and the Model 201 single channel syringe pumps. You can simultaneously connect and address up to sixteen Model 208 and sixteen Model 201 pumps with an Automation Station or a Prep Station.

 

 

 


 

 

Channels

8 ganged syringes (Model 208); 1 syringe (Model 201)

Syringes

25 µl to 50 ml borosilicate and Teflon syringes

Valves

3, 4, 5, or 6 way rotary shear, 200 turning, anodized aluminum body, with wetted surfaces of Teflon and Kel-F

Plunger Speed

2.5 sec to 10-20 min, full stroke and programmable

Travel

60 mm maximum

Repeatability

<0.01% typical

Precision

<0.01% typical

Resolution

24,000 or 48,000 steps per stroke


 

Multi-Channel Peristaltic Pumps You can simultaneously connect and address up to sixteen Model 200 PR peristaltic pumps on an Automation Station or a Prep Station.


Channels

3

Flow Rate

Tubing dependent

Fluid Compatibility

Tubing dependent

Speed and Direction

Manual and computer controlled

 



Rinse Station Pumps
We offer the Model 203 RS and the Model 206 RS diaphragm pumps for aqueous rinse station applications. You can simultaneously connect and address up to fifteen Model 200 Series RS rinse pumps to an Automation Station or a
Prep Station.

Flow Rate

0.3 liter/min (Model 203); 0.6 liter/min (Model 206)

Fluid Compatibility

Aqueous solutions only

 


Thermo Vision Colorado offers a wide variety of probe rinse stations, custom racks, and adapters. We configure the Automation Station and the
Prep Station to accommodate single, multiple, and disposable pipette style probes. New features and accessories for the Automation Stations and Prep Stations are under continuous development. Please phone us at 800-747-3308 or 970-241-3308 or use our "Contact Us" form to let us know about your needs and wishes. We may have already developed what you want. We are eager to hear from you!

<back to top>

 
    
Thermo Vision Colorado
 2527 Foresight Circle
 Grand Junction, CO 81505
  © 1999-2024 Thermo Vision Colorado, All rights reserved
map map other cont site