| |
 "As
a Mid -Atlantic/Eastern USA located distributor of chemistry and plating supplies,
we are pleased with the consistent praise from our customers regarding TecNu
Technology and Power Supply Performance."
(Jeffrey Peters, Seiler-Hughes, Baltimore, MD)
|
TecNu™
electroplating power supplies come complete with many standard options included
at no extra charge. Some examples of TecNu™
standard features, providing you a more powerful, cost effective and precise production
tool, include:
- Fully sealed environmental enclosure
- Under 1% ripple
- Internal amp•minute <or> amp•hour totalizer
- All digital meters and back light alpha-numeric displays
- Front panel digital calibration
- Programmable job / waveform libraries
- Nonvolatile memory for all user setting
TecNu™
Options are available for all the power supplies models at an extra charge
to assist in meeting your application specific needs. Our many options enable
custom power supply performance, flexibility, increased automation, improved measurement
and added functionality.
Please consider the options
below carefully for your TecNu™
Power Supply, as they allow you to customize your unit to tackle the most challenging
and diverse jobs.
|
Custom
Options Available on Your TecNu™
Power Supply
|
|
OPT:A
|
Option
A - 4-20mA Analog Bi-directional Interface |
| |
Addition of this option
to your DuraPower™
model enables the operator to set and read the output voltage or current from
a PLC device.
|
|
OPT:D
|
Option
D - RS485 Digital Bi-directional Interface
|
| |
Addition of this option
to your DuraPower™,
DuraPulse™ or DuraProcess™
model enables the operator complete control of the power supply from a remote
location. This includes; output voltage, output current, amp-hour counter, run/stop,
remote/local operation, all unit alarms and all user accessible memory locations.
Compatible with a PC or PLC.
|
|
OPT:M
|
Option
M - 19" Rack Mount Flanges |
| |
Addition
of this option to your DURAPOWER™,
DURAPULSE™ or DURAPROCESS™
model enables the operator to mount the unit in a standard 19" rack. Not available
on some larger models. |
|
OPT:P
|
Option
P - Programmable Amp-minute Counter with Preset & Totalizer |
| |
Addition of this option to your DuraPower™
or DuraPulse™ model
enables the operator to select a preset count for the unit in Amp-minutes. When
the Amp-Minute counter reaches the user programmed Preset Count value the unit
powers down and awaits for operator intervention. Includes an internal totalizer
and reset control for each meter. This feature is standard on DuraProcess™ |
|
OPT:R
|
Option
R - Start Up Ramp |
| |
Addition
of this option to your DuraPower™,
DuraPulse™
or DuraProcess™
model enables the operator to program a start up ramp. The output will then ramp
from no amplitude to the steady state.The length of time of the ramp and steady
state amplitude are user programmable. |
|
OPT:S
|
Option
S - RS485 Control Software for a PC |
| |
TecNu™
has designed a PC software package to communicate with your DuraPower™,
DuraPulse™
and DuraProcess™
model enabling very powerful and cost effective process automation and data logging.
This option includes; software disk compatible with a Windows PC. Once installed,
the operator can control all settings on the unit load job libraries and log data
settings by time. The TecNu™
power supply must have the OPT:D option (RS485). |
|
OPT:T
|
Option
T - Programmable Timer Counter with Preset |
| |
Addition
of this option to your DuraPower™
or DuraPulse model enables
the operator to select a preset count for the unit in minutes. When the Minute
counter reaches the user programmed Preset Count value the unit powers down and
awaits for operator intervention. Includes a reset control. |
|
|
