When you first power on your Segway HT, it will automatically be in Power Assist Mode-- a non-balancing mode. You must not attempt to ride the Segway HT when in Power Assist Mode.
Use this mode while walking with the Segway HT to move over slippery surfaces; over obstacles; up and down steps; up, down, or across steep slopes; and elsewhere where riding is not safe and appropriate.
When your Segway HT is in Power Assist Mode, the Display will have an orange backlight and no face, as shown in the illustration to the left.
To switch from Balance Mode to Power Assist Mode, step off the Platform and tap the Mode Button. Then check the Display to make sure the Segway HT is in Power Assist Mode. You can tap the Mode Button to toggle between Balance Mode and Power Assist Mode, as long as you aren’t standing on the Platform.
When the Segway HT is in Power Assist Mode, the Steering Grip can be used to power the Wheels. You should stand to the side so that you do not run the Segway HT into your shins.
Twisting the Steering Grip produces forward or backward motion. The Segway HT responds quickly to your command, so be prepared and rotate the Grip slowly. Until you become familiar with how the Segway HT moves in Power Assist Mode, you should stand to the side of the Segway HT so that you do not run the Segway HT into your shins.
Practice moving the Segway HT back and forth to get the feel of Power Assist Mode.
Once you are familiar with the Segway HT’s movement when in Power Assist Mode, you can move around to the front of the Segway HT and hold both Hand Grips for more control.
When in Power Assist Mode, the Segway HT will automatically shut down if approximately 60 seconds elapse without use of the Steering Grip to power the Wheels. If this automatic shutdown occurs, reinsert the Key to power on.
When using Power Assist Mode (and even when the Segway HT is powered off), keep the Segway HT below you at all times. Lead it up steps and slopes. Keep it below you when descending steps and slopes.
|