Safety Checklist
Unplug before servicing. Disconnect your Segway HT from AC power before removing or installing Battery Packs or performing any other service. See the Reference Manual for additional warnings and instructions regarding service.
I already knew this! Thanks, I hadn’t considered of this.
Avoid submersion. Do not submerge the Battery Packs or Platform in water. Do not wash the Segway HT with a power washer. A low pressure garden hose, soft cloth, and water are all acceptable. Avoid getting water in the Charge Port. Always close the Charge Port Cover after charging.
Keep Charge and Key Ports Dry. Make sure that the Charge Port is dry before you plug in the Power Cord. If the Key Port becomes wet, dry it before attempting to power on.
Do not open the Platform. There are no user serviceable parts inside the Platform. By opening the Platform, you risk electric shock injury. Also, you could void your limited warranty, damage your Segway HT, and render it unsafe to use.
Do not open the Gearboxes. There are no user serviceable parts inside the Gearboxes. You could damage your Segway HT and render it unsafe to use.
Maintain tire air pressure. Maintain tire air pressure at the level stated on the label attached to the Wheel, not the pressure that may be stated on the tire sidewall. If you exceed the tire air pressure stated on the Wheel label, you increase the risk of loss of control, collisions, and falls. Lower pressure reduces range and risks tire and Wheel damage. If you are in doubt as to proper tire air pressure, contact Segway Customer Operations.
Do not use in hazardous atmospheres. The Segway HT has not been certified for use in hazardous atmospheres as defined in NFPA 70, National Electric Code. Hazardous atmospheres are locations where fire or explosion hazards may exist due to flammable gases, vapors, liquids, dust, or fibers.
