EasyLyte Na/K/Ca/pH
Sodium/Potassium/Calcium/pH Analyzer
EasyLyte Highlights:
- Yes/No prompted operation
- Simple maintenance, and reliability into one economical design.
- EasyLyte Calcium measures ionized calcium, sodium, potassium, and pH on a single sample at 37 degrees C.
- The 800mL solutions pack minimizes the need to change reagents and makes cost per test lower than ever before.
- Automatic probe wiping ensures operator safety.
- Calibration is completely automatic and electrodes are maintenance free with long life.
|
|
Easylyte Na/K/Ca/pH is manufactured by Medica Corporation
EasyLyte Features & Advantages:
The advantages of having an EasyLyte Electrolyte analyzer are numerous.
From Small Hospitals, Intensive Care Units, Cardiac Care units, Medical Office Buildings, Physician's offices to Veterinarians; the EasyLyte performs well under any conditions where electrolyte measurements are required.
Features |
Advantages |
Modular Solution Pack |
Absolutely no handling of waste, which minimizes biohazard contact. Low reagent cost per test. |
Modular Analyzer Design |
Extremely easy to maintain and repair, minimizing downtime of analyzer. |
800 ml Reagent Pack |
Provides the additional cost efficiency of up to 1330 tests per pack. |
Extensive QC & Patient Data Storage |
Convenient access and storage of quality control data. Patient histories immediately accessible for re-evaluation. |
Simple Yes/No Menu Operation |
With simple option changes, all laboratory personnel can be easily trained to operate the analyzer and perform diagnostics. |
Automatic Probe Wiping |
Contact with patient sample is minimized, reducing the need to touch bio-hazardous material. The frequency of probe occlusion is diminished and down time is reduced. |
Automatic Standby Mode |
Reagent consumption minimized, providing cost effective operation. |
EasyLyte Calcium Specifications:
Parameters
|
Measures Na+, K+, Ca++, pH
Measures Ca++, pH at 37C + 0.1C
Ionized Calcium reported at sample pH
|
Sample
|
Whole Blood, Serum, Plasma, or Urine
|
Sample Size
|
100 ml Whole Blood, Serum or Plasma
|
Detection Range
|
Blood:
Na+: 20-200 mmol/L
K+: 0.2-40 mmol/L
Ca++: 0.1-6 mmol/L
pH:
6.0-8.0 pH units
|
Analysis Time
|
60 sec (Blood)
|
Temperature of Measurement
|
37C+ 0.1C
|
Analytes Calculated and Reported
|
Ca++ at pH = 7.4
|
Calibration
|
Automatic or On-Demand
|
Resolution
|
Na+: 0.10 mmol/L
K+: 0.01 mmol/L
Ca++: 0.01 mmol/L
pH: 0.005 pH units
|
Reproducibility
|
Typical Within Run (n=20)
Blood, Serum, Plasma
Na+: CV< 1% (80-200 mmol/L)
K+: CV< 2% (1.0-10.0 mmol/L)
Ca++: SD< 0.02 (0.4-1.5 mmol/L)
pH: SD< 0.01 (6.8-8.0 pH units)
|
Data Storage
|
125 patient results
Three levels of QC results
|
Output
|
32 character alphanumeric display
40 column printer
Serial port (RS-232)
|
Ambient Conditions
|
15-32 C (60-90 F), <85% humidity
|
Power
|
100-115 ~VAC 50/60 Hz, 0.8 A or 220 ~VAC 50/60 Hz, 0.4 A (Factory set)
|
Size and Weight
|
9.5 in. (24 cm) W x 16.5 in. (42 cm) H x 8.0 in. (20 cm) D, 13 lbs. (5.8 kg)
|
These
materials provided to you by:
Electra Medical Corporation
|