CELEBRATING
20 YEARS
Thank you for
helping make our company a success!
Admix was founded in 1989 in
Londonderry, New Hampshire. Just 9
years later, we had already outgrown
the space we were leasing. We opted
to build our own facility a few
miles away in Manchester and
recently doubled the size of our
building in 2007. It's been a great
20 years and we sincerely thank you
for making it happen! We look
forward to growing our relationship
with you in the years to come.
|
|
Check Out This Sweet Deal |
Are
you using granulated or liquid
sucrose?
Then have we got a
SWEET DEAL for
you!
Admix,
working together with existing
processors using
liquid
sucrose,
has calculated savings of
$1,500-2,000 in material and
freight costs for each 5,000
gallon tanker of liquid sucrose
purchased. That's an average
savings of $12,000-16,000
per month
if you purchase just two (2)
tankers weekly!
How can you do it?
With the Admix Fastfeed
Powder Induction and Dispersion
skid. The Fastfeed
allows you to make your own
liquid sucrose.
Below is a
sample calculation if you use
10,000 gallons of liquid sucrose
weekly:
There is 75,000 pounds of
granulated sucrose dissolved in the
10,000 gallons of a 67.5 brix
liquid sucrose. You would need
37.5 bulk bags (2,000 lbs.) of
granulated sucrose. The
Fastfeed will induct and
disperse granulated sucrose from
bulk bags at up to
400 pounds per minute
allowing you to make 10,000
gallons of liquid sucrose
conservatively in 4
hours.
Not using
liquid sucrose? Ask us how to
drastically improve your
batching of
granulated sucrose.
We recently supplied a Fastfeed
powder induction & dispersion
skid for a beverage processor's
new product. They needed a
faster and safer way to add
10,000 pounds of granulated
sucrose to their 9,000 gallon
batch tank. The Fastfeed
allowed the processor to
increase capacity
and completely
dissolve
the sucrose faster from the
safety of floor level
as compared to dumping
sugar directly into the top of
the 9,000 gallon blend tank.
Similar savings are also
available for
fructose
batching. So, if you're using
sugars, granulated or liquid,
sucrose or fructose, give us a
call and learn how you can make
it better!
|
Reduce Your Annual Parts Expense By
50% |
Just last
month, our Field Service team
called a long-standing customer
to schedule an
in-plant equipment audit
and recommended that we sit down
to review what appeared to be
excessive replacement parts
usage in 2008. The Plant
Manager seemed a bit surprised
that Admix had taken the
initiative, noticed the
substantial spare parts expense
and brought it to his
attention. He explained that he
had not realized the full extent
of their maintenance costs and
was anxious to hear what we had
to say. We were confident that
we could offer creative
solutions to lower their costs.
Kevin
Beaudette, our Field Service
Representative, conducted an
in-plant equipment audit
including a thorough
walk-thru to inspect and
record the condition of each
mixer and to look for
possible improvements in
processing procedures. Upon
completion of the audit, he
provided a complete parts
order history, including
downtime, and offered
creative options going
forward with proposed
savings of
51-73% per mixer.
The
audit team also recommended
procedural changes to
eliminate premature
bearing failure and
water intrusion and
uncovered ways to
increase yields!
You
don't have to wait for us to
call ... contact Kevin today
to schedule your
in-plant equipment audit
and spare parts
review! Don't
forget to ask about our
Preventive Maintenance
program. Our ultimate
objective is to work closely
with you to offer creative
solutions that
drastically reduce your
mixer maintenance costs and
downtime by 50% or more.
Click here for more
information.
|
|
|
Admix, Inc.
Phone:
800.466.2369
|
Come see us at:
ExpoPack '09
Mexico City, Mexico
June 23-26
Click here
for info
|
In our next
issue: |
Test Drive
Before You
Buy |
Don't scrap
it, Rework it! |
and more... |
|
|
|
|
Lean On Us... We're More Than Just 'Mixer Guys' |
"Chances
are extremely good that we've already run across
the mixing challenge you're facing!"
You might think that sounds like a bold
statement, but we're confident when we make
the claim.
We're more than just 'mixer guys', we
understand sanitary process! The depth of
our experience runs deep, in fact, just our
applications engineers alone bring over
100 years of
sanitary process experience and ingredient expertise
to the table. Combine this with our
nationwide Rep force and we can add a few hundred
years to that number! Our well rounded staff also
includes a Food Scientist with a
strong background in the Dairy industry, a
Technical Services department with a focus
on Quality Assurance, a
Field Service department offering
hands-on experience from our manufacturing
floor to your production floor, a Customer
Service team providing both pre and post
order assistance and our factory-trained
experts available to conduct in-plant
equipment audits and training seminars.
Together with the key ingredient and "total
process line" suppliers that we partner with, we
can provide you with practical plant experience
and recommend procedural and equipment
adjustments that will generate an
immediate positive impact on your bottom line.
We invite you to
lean on us,
consider Admix for solutions to reduce your
overall operating costs and emerge from these
tough market conditions stronger and ready to
face the next challenge. Don't wait, contact
us today!
Click here
to get started and schedule your no-charge, no
obligation process audit.
Click here for
more information on our batch processing, inline
mixing & milling and powder induction equipment. |
Share Your Admix Experience |
Send us your article, application story or quote
and if we use it in a future issue of FastRead,
we'll send you a $50 prepaid debit card.
|
|
|