PhoneRider USB Specification

PhoneRider USB introduces a new level of serviceability and ease of use to CTI.  Base on the industry standard Universal Serial Bus (USB) specification, PhoneRider USB simply plugs into the USB port on a PC, and hardware set-up is complete.  It eliminates the need to open the computer to install internal cards.

Features:

·         Dynamic media streaming architecture and full duplex DSP environment

·         Unparalleled support for local telephone and/or headset

·         Support for a parallel connection to modem or fax device (RS-232 or RJ-11)

·         TAPI 3.0 integration with support for IP telephony

·         Full duplex speakerphone

·         Optional numeric keypad and LCD display

·         Embedded memory for storage of voice and fax messages while PC is turned off

·         Scalable to eight ports (USB 1.1)

Applications

·         IP telephony

·         Messaging (voice record and playback, e-mail integration, fax integration)

·         Adaptive audio streaming

·         Attended desktop telephony

·         Audio conferencing (PSTN and IP)

·         Call logging/IP monitoring

About USB

·         USB is a “one plug fits all” Plug and Play peripheral connection endorsed by Compaq, Hewlett Packard, Intel, Lucent Technologies, Microsoft, NEC, and Philips.  Features include:

·         Hot-swap - install or remove PhoneRider in a live systems.  The PC automatically detects it and configures the necessary software.

·         USB Hubs - peripheral devices that have additional ports, enabling applications to scale from one to eight ports (under USB 1.1, and beyond eight ports with USB 2.0)

Technical Specifications

General  

Supports Windows 2000

Host Interface      

USB 1.1 (12Mbits/s)

Telephone Interface

                One RJ-11 for external (loop start) phone lines

                One RJ-11 for local phone support

Peripheral Interfaces

                Headset In

                Headset Out

                Speaker Out for non-amplified speakers

                Line Out for amplified speakers

One-Board Processor

                Main Processor:  Analog Devices DSP 2181

Environment

                Operating Temperature: 10º  to 40º C

                Storage Temperature:  5º to 55º C, 15% - 80%

                  relative humidity, non-condensing